FSX / p3d v3 Vickers MKIII "Vildebeest" Torpedo Bomber. This is an FSX update for the Vickers "Vildebeest" MKIII torpedo bomber, updated previously by Shessi of Sim Outhouse. The package features five great textures by Uncletgt, which are so nice and crisp that I figured that this great model just cried for new panels and gauges. Thanks to Baldy (SOH) for the original CFS2 model and to Shessi (SOH) and his team for their updates. Added camera views by Erwin Welker. New virtual cockpit and 2D panel, smoke configuration and FDE updates by Michael Pook.
FSX / p3d v3 Metal Aircraft Corporation Flamingo Updated. This is re-upload of the the MAC Flamingo, recently posted by Leonardo Santos, who found this beautiful aircraft somewhere on the internet and posted it on behalf of the original designer Craig Richardson. Some users have had some problems installing it right, so here is the whole package again without a self-installer. The package now festures a 2D panel, an extensively modified and enhanced VC with a lot more gauges. New camera views for the passenger cabin and copilot, exhaust smoke as well as thumbnails added. Thanks to Leonardo Santos for finding this rare model and to Craig Richardson for the original model. Panel updates, thumbnails and smoke effect by Michael Pook.
FSX / p3d Native Boeing P26 Peashooter. The Boeing P-26, nicknamed the "Peashooter", was the first all-metal production fighter aircraft and the first pursuit monoplane used by the United States Army Air Corps. The prototype first flew in 1932. It was used as late as 1941 in the Philippines. Two models by A.F. Scrub.
FSX / p3d v3,v4 Hawker Fury MkII. The Hawker Fury was a British biplane fighter aircraft used by the Royal Air Force in the 1930s. It was a fast, agile aircraft, and the first interceptor in RAF service capable of speed higher than 200 mph. It was the fighter counterpart to the Hawker Hart light bomber. FSX / p3d model by A.F. Scrub.
FSX / p3d v3,v4 Stampe Vertongen SV4. The Stampe et Vertongen SV.4 (also known as the Stampe SV.4 or just Stampe) is a Belgian two-seat trainer/tourer biplane designed and built by Stampe et Vertongen. The aircraft was also built under licence in France and French Algeria. The SV.4 was designed as a biplane tourer/training aircraft in the early 1930s, by Stampe et Vertongen in Antwerp. FSX / p3d v3,v4 upgrade by A.F. Scrub.
FSX / p3d v3,v4 Curtiss Hawk BF2C-1. The BF2C Goshawk (Model 67) carrier fighters were introduced into United States Navy service in October 1934 for use aboard USS Ranger. Their service aboard Ranger would only last a number of months as it was observed that their landing gear was not up to par, but generally the US Navy felt that the 27 purchased contributed to the development of the American aircraft carrier force. FSX / p3d v3,v4 upgrade by A.F. Scrub.
FSX / p3d v3,v4 Great Lakes. The Great Lakes Sport Trainer is an American biplane trainer and aerobatic aircraft. It was originally produced in large numbers before the company building it went bankrupt in the Great Depression in 1933. Owing to its continuing popularity, however, it was eventually placed back into production in the 1970s and again in 2011 by WACO Classic Aircraft. FSX / prepar3d v3,v4 upgrade by A.F. Scrub.
FSX / p3d v3 Lockheed Electra L-10 Updated. This is an FSX update for the Lockheed Electra L-10, originally designed in 2004 by the Team FS-Design Berlin. The original model is compatible with FSX but some of the gauges are incompatible and, particularly, the VC panel is transparent in most of its sections. This update features a fix for this graphic issue. The gauge configuration is based upon the one by Peter Mercy, who posted a new update in 2017 but that update still displayed the VC transparency in FSX . The package also features seven fine repaints by different authors, among them the one used by Amelia Earheart on her last flight in 1937 and the one that appeared in the famous movie "Casablanca" featuring Humphrey Bogart and Ingrid Bergman. All credits go to the original designers of the model Arik Hohmeyer and Team "FS-Design Berlin", the authors of the additional repaints and to Peter Mercy for his 2017 update. The original readme contains all the FS-Design Berlin members' names. Corrected smoke effect for FSX and additional cam views for copilot and passenger cabin added. VC fix, new 2D panel with animated throttle panel and new cam views by Michael Pook.
FSX / p3d v3 Fairey Fantome Updated. The Fairey Fantome, also known as the Fairey Feroce, was a British fighter prototype of the mid-1930s. The prototype was designed and built by Fairey Aviation and three production aircraft were assembled in Belgium by Avions Fairey. The Fantome was designed in 1934 by Marcel Lobelle to meet a specification drawn up on behalf of the Belgian Aeronautique Militaire who were to hold an international competition to find a replacement for the Fairey Firefly II. This is an update for A.F. Scrub's model, now with entirely new VC and 2D panel. It features three outstanding new repaints designed by Andre Ludick as well as the original livery enhanced by Andre Ludick also. Thanks to A.F. Scrub for the original model and particularly to Andre Ludick for these beautiful repaints. New panel designs and gauge configuration by Michael Pook.
FS2004 / FSX /Acceleration/ p3d v3 German Prewar Biplane Arado 95. This floatplane was supposed to be used as a coastal patrol, reconnaissance and light attack fighter. The first prototype, an all-metal biplane, was powered by a BMW 132 radial engine, flew in 1936. The prototype of the Ar-195 with wheels instead of floats was proposed for carrier operations on the never completed German aircraft Carrier Graf Zeppelin. FSDS 3.5 model by Erwin Welker.
FS2004 / FSX / p3d Arrow Active Mk II. This is the second improved version of an aircraft designed in 1931. Constructed of steel, aluminium and fabric it competed in the UK Kings Cup air races. Refurbished in 1958 and fitted with a Gipsy Major engine, it has now been returned to its original Gipsy III engine and it resides at Breighton with The Real Aircraft Company. Designed to be used in FS2004 it will portover to FSX with only an engine start problem. It can also be used in p3d , although mods are needed to change the prop texture on the rear face. By Keith Paine.
FSX / p3d v4 Curtiss JN-4D. Mass production of aircraft in the United States began with the Curtiss JN "Jenny" series (over 6000 built). This JN-4D model aircraft is produced from source files included with the FS9 SDK. The source files were modified to provide FSX /P3Dv4 compliant exterior and interior models while retaining compatability with existing repaint skins such as those available on the Ford Tri-motor Project website, by Dave Carroll.
FSX /P3Dv3,v4 Bucker Bu 133 Jungmeister The Bucker Bu133 Jungmeister (young master) was an advanced trainer of the Luftwaffe in the 1930s. It was a single-engine, single-seat biplane of wood and tubular steel construction and covered in fabric. The Jungmeister design remained competitive in international aerobatic competition into the 1960s. FSX / p3d v3,v4 upgrade by A.F. Scrub.