FSX / p3d TDS Boeing 727-100 Passenger Base Package. Developed by Tenkuu Developers Studio (TDS). Model features high resolution textures, dynamic flexing wings, nose gear steering, rudder lock, ground spoilers, low speed aileron locks at high speed, fully animated control surfaces, fully independent suspension, trim animation, opening passenger doors, rolling wheels, animated thrust reversers with reverser block doors, detailed textures, full night lighting, ground service vehicles and more. Package contains model and all files necessary for immediate flight. Model design by Hiroshi Igami. Flight dynamics design by Nick Wilkinson. Effects by David Biggar. House Livery by Carlos Eduardo Salas. Master textures by Kyle Schurb. By Stian Svensen.
FSX /P3Dv3,v4 Bucker Bu 133 Jungmeister The Bucker Bu133 Jungmeister (young master) was an advanced trainer of the Luftwaffe in the 1930s. It was a single-engine, single-seat biplane of wood and tubular steel construction and covered in fabric. The Jungmeister design remained competitive in international aerobatic competition into the 1960s. FSX / p3d v3,v4 upgrade by A.F. Scrub.
FSX / p3d v3,v4 Price Ultimate 10 Dash 300s. The 10 Dash Model 100 was designed as a sport biplane that could be either bought assembled or for amateur construction from either plans or a kit. A competition aerobatic variant, the 10 Dash 300 is fitted with either a 300 hp (224 kW) or 350 hp (261 kW) Lycoming engine with a three-bladed propeller. Produced by Canadian pilot Gordon Price's Ultimate Aircraft Ltd, the 10-300s was the pinnacle of a series of developments which started life as upgrade packages for the Pitts Special aerobatic bi-plane. Gmax model by A.F. Scrub.
FS2004 / FSX / p3d Airbus A350 2D Half Panel. This panel is intended for use with Freeware aircraft. The main panel has been updated to include Side Stick Priority, integrated Heading / Track data in the Autopilot SPD / HDG Window. Imperial / Metric altitude conversion has been added to the Altitude / Vertical Speed Autopilot Window. A terrain rolling map with TCAS for AI aircraft has been added to the MFD. The Overhead panel includes updated switches which are multi-functional, blank, On/Off and fail depending on the status of the APU, Batteries and Ground Power. For example if the engines are not running the engine generators will show 'Fail' etc. All switches are back lit for night flying when the panel lights are off. The panels are set to load cold and dark. There are no manuals with these panels so please take time to read the "readme" file and play with the switches noting combinations especially in Overhead panel. Includes panels and all gauges. By Alan M Harvey.
FSX / p3d v3,v4 North American F-86F Sabre. The North American F-86 F Sabre was the most capable western fighter of the early to mid-1950s. This swept wing, single engine jet was the most important western aircraft of the Korean War and often tangled with Russian-made MiG-15s over the infamous “MiG Alley”. It was a hard struggle not only for the Korean sky, but also between two excellent aircraft builders of the East and West. In addition to its primary role as an air-to-air fighter, the Sabre could also carry bombs and air-to-ground rockets to attack ground targets. FSX / prepar3d v3,v4 model by A.F. Scrub.
p3d v4 Scenery--India Airports Megapack 2020. This is a scenery collection of many Freeware Indian sceneries by different scenery makers. I have only merged into one. For the full list of airports see the readme.txt file. Scenery Credits: Tony Vienonen, Srikar Galgali, Rohit Augustine, Sachin Gnath, Gunadeep and others. Package by Punit Soneji.
FSX / p3d /Acceleration/ FS2004 Dornier Do-24 Flying Boat. Originally the DO24 seaplane was a Dornier construction, requested by the Dutch Navy. Then in WWII the German military used it successfully for different purposes, including search and rescue. The excellent aircraft mastered even take-offs and landings in relative high waves. Even after the war Spain used one plane for SAR missions arround the island of Mallorca. The original FS2004 sim-model is made by Wim Regeer. "Shessi" from Sim-outhouse (SOH) reworked that model with a virtual cockpit (VC) including a cabin for the engineer and radio operator and a four men crew. The textures for the SAR version are made by Antonio Diaz. The panel rework, FSX-configuration with weapon effects and cameras for internal, external and gunner views are done by Erwin Welker.
FSX / p3d v4 Curtiss JN-4D. Mass production of aircraft in the United States began with the Curtiss JN "Jenny" series (over 6000 built). This JN-4D model aircraft is produced from source files included with the FS9 SDK. The source files were modified to provide FSX /P3Dv4 compliant exterior and interior models while retaining compatability with existing repaint skins such as those available on the Ford Tri-motor Project website, by Dave Carroll.
FSX / p3d v3,v4 North American T-39 Sabreliner. The North American Sabreliner, later sold as the Rockwell Sabreliner, is an American mid-sized business jet developed by North American Aviation. It was offered to the United States Air Force (USAF) in response to its Utility Trainer Experimental (UTX) program. It was named "Sabreliner" due to the similarity of the wing and tail to North American's F-86 Sabre jet fighter. Military variants, designated T39 Sabreliner, were used by the USAF, United States Navy (USN) and United States Marine Corps (USMC) after the USAF placed an initial order in 1959. The Sabreliner was also developed into a commercial variant. FSX /P3Dv3,v4 native upgrade by A.F. Scrub.
p3d v4 Scenery--Wuhan Tianhe International Airport (ZHHH) in China. This is a complete rework update for the default Wuhan Tianhe International Airport(ZHHH) in China for prepar3d v4. All terminals and gates are represented in this update and are place in the correct location as that of the real ZHHH airport. By Wendell Melton.
p3d v4 Scenery--Osaka International Airport-Itami RJOO 2020 Japan. This is a completely new updated version of my RJOO airport with some new buildings to reflect the real Itami Osaka International Airport. This is a stand-alone AFCAD update for the default RJOO in prepar3d v4. Nothing else is needed. By Wendell Melton.
FS2004 / FSX / p3d v3 Boeing 314 Clipper flying boat with VC. A PAA Pacific Clipper Boeing 314 with interior. The Boeing 314 was a long-range passenger flying boat. Four engines a 1600 hp allowed a speed up to 300 km/h. Only 12 units were built between 1938 and 1941. The luxury interior included dining room, smoker compartment and sleeping cabins. The original FS2004 model was built by Mike Stone and works also with the common repaints. Reworked model by inserting a virtual cockpit plus other interior is done by Erwin Welker.
FSX / p3d Royal Saudi Air Force Eurofighter Typhoon 2030 Vision. A repaint of the Royal Saudi Air Force Eurofighter Typhoon 2030 vision. The kingdom has a vision for 2030, a number of aircraft have been painted in a special scheme. The 2030 vision is a plan to reduce Saudi Arabia's dependence on oil, diversify its economy, and develop public service sectors such as health, education, infrastructure, recreation and tourism. This aircraft belongs to the RSAF 2 Wing based at Taif (King Fahad) Air Base. Assinged to number 10 squadron. By Dale Ashcroft.
p3d v4 Scenery--New Chitose Airport (RJCC) 2020, Japan. This is a prepar3d v4 update for the default New Chitose Airport (RJCC) in Japan. Updates include new international terminal and accurate parking for gates and cargo. Also update allows use with GSX. By Wendell Melton. See also RJCC_ELEVATION_FIX.ZIP
FS2004 / FSX /Acceleration/ p3d v3 German Prewar Biplane Arado 95. This floatplane was supposed to be used as a coastal patrol, reconnaissance and light attack fighter. The first prototype, an all-metal biplane, was powered by a BMW 132 radial engine, flew in 1936. The prototype of the Ar-195 with wheels instead of floats was proposed for carrier operations on the never completed German aircraft Carrier Graf Zeppelin. FSDS 3.5 model by Erwin Welker.
FSX / p3d Scenery--ETM12m Africa - Enhanced Terrain Mesh 12m for Angola vol.05. This is an Enhanced Terrain Mesh SRTM 0.41 arc sec (12.50 meters) resampled at LOD 11 ( FSX / p3d SDK). This replaces all previous terrain meshes. Mainly the area covered by this terrain mesh is related to the Angola. Version 1.00 Work in progress. Copyright (C) 2019 by Giovanni Miduri. All rights reserved.
FS2004 / FSX / p3d 2D Airbus A350 Panel For Multiple Monitors. This panel is intended for use with Freeware aircraft and computer operating systems, video cards and display expanders that can horizontally span the display across two or more monitors. The main panel has been updated to include Side Stick Priority, integrated Heading / Track data in the Autopilot SPD and HDG Window and Imperial / Metric altitude conversion data in the ALT / VS Autopilot Window. A Terrain rolling map with TCAS for AI aircraft has been added to the MFD. All switches are back lit for night time flying with the internal panel lights switched off. The Overhead panel includes updated switches which are back lit and multi-functional, blank, On/Off and fail depending on the status of the APU, Batteries and Ground Power. Switching the batteries off when on the ground produces a "cold and dark"cockpit. Minor changes have been made to the Pedestal including limited movement of the Trim Wheels in response to Autopilot changes in pitch. There is no manual with this panel. Please take time to read the "readme" file as it contains details on how to set up and use the panels. Includes panels and all gauges. By Alan M Harvey.
FS2004 / FSX / p3d Arrow Active Mk II. This is the second improved version of an aircraft designed in 1931. Constructed of steel, aluminium and fabric it competed in the UK Kings Cup air races. Refurbished in 1958 and fitted with a Gipsy Major engine, it has now been returned to its original Gipsy III engine and it resides at Breighton with The Real Aircraft Company. Designed to be used in FS2004 it will portover to FSX with only an engine start problem. It can also be used in p3d , although mods are needed to change the prop texture on the rear face. By Keith Paine.
FSX / p3d La Compagnie Airbus A321-200neo. Textures only for FAIB A321-200neo CFML_S. Model and paint kit by FAIB. This plane made is first A321-200neo for La Compagnie; a second one should come in september. The two planes will replace the two old B757-200W. Tested day and night with p3d v4. Painted by Joel Branchu for real traffic with the registration
FSX / p3d Buffalo Airways C-160 Transall Buffalo Airways "Kelly J." (fictional). I am a big fan of the series "Ice Pilots", with which the airline Buffalo Airways came to great prominence. Looking at the episodes, I was always amused to wonder why Buffalo struggles with bulky goods every time with the DC3, C46 and L188 side loading gates, and does not buy planes with rear-loading ramps, especially as the German Air Force is changing from the C160D to the A400M is. That's why I decided to skip (at least virtually) Joe Mc Bryan and get the first C160 Transall for Buffalo Airways ... In the series, a character always stands out - Kelly Jurasevich - manager for food freight. This woman had her heart in the right place, was always there for everyone and rightly the "mother of Buffalo" ... Unfortunately, Kelly died of cancer at the age of only 50 in 2017 and for that reason I dedicate her to this repaint !! Wherever you are Kelly, I hope you like it. You need the payware C-160 from JSS Simulations. By Frank Felix.
FSX / p3d USMC CH-53E Super Stallion repaint package. This package is a set of 28 repaints for Nemeth's Sikorsky CH-53E Super Stallion, which also is included in prepar3d version 4.4 and later. I have included three low-vis paints for each USMC Heavy Helicopter Squadron that is currently active, and two low-vis paints for the reserve squadron HMH-772 and two more for the Fleet Replacement Training Squadron HMHT-302. Specific BuNo references were used based on relatively recent photos (please note that the as of late, USMC CH-53E aircraft are going to a 3-digit paint scheme vs. the 2-digit scheme depicted in this set). The purpose of these paints is to provide multiple aircraft in any given operational squadron for those that might enjoy simulating USMC aviation in multiplayer scenarios. This set is intended to be used with the Haze Gray Studios / Simworks Studios CEX US Navy payware addon, but obviously, it can be used independently by all those that have an appreciation for USMC aviation. By Mark Sewell.
FSX / p3d Airbus A319 Neo PW First Test Plane. Textures only for the FAIB A319 NEO PW. Model and paint kit by FAIB. This plane made its first flight 24/03/2017 with CFM Leaps and flys now at Blagnac airport with PW engines since 24/04/2019. Tested day and night with P3Dv4. Painted by Joel Branchu for real traffic with the registration.
prepar3d RAF Voyager KC2 ZZ331. Repaint for the Aerosoft A330 Pro. p3d v4.5 Royal Air Force Voyager KC2 ZZ331 Tanker aircraft from number 10 and 101 Sqn. A repaint of the payware Aerosoft Professional A330. 10 and 101 Sqns both currently fly the RAF pooled fleet of Airbus Voyager KC2/3 tanker aircraft, supporting RAF operations worldwide, based at RAF Brize Norton in Oxfordshire. By Matt Kingscott.
FSX / p3d Varig Brazilian Airlines Boeing 757-200 v2. The TDS - Tenkuu Developers Studio B757-200 features dynamic shine, opening doors and cargo doors, all normal animations, realistic FDE, accurate dimensions, accurate specifications, accurate flight performance based on performance charts, accurate flight performance based on certified pilot input, different engine variants, different engine performance, thrust maps, and fuel burn per different engine type, different and accurate gauges based on engine type and performance, default and alternate gear points for aircraft look vs. performance feel, new detailed lighting effects. By Luiz Antonio Perina.
FSX / p3d v3,v4 Pitts S2A biplane. The Pitts Special is a series of light aerobatic biplanes designed by Curtis Pitts. It has accumulated many competition wins since its first flight in 1944. The Pitts biplanes dominated world aerobatic competition in the 1960s and 1970s and, even today, remain a potent competition aircraft in the lower categories. This is a VERY hot model! FSX / p3d v3,v4 upgrade by A.F. Scrub.
FSX / p3d Turkish Airlines Douglas DC-10-10. This is a realistic texture of the TC-JAV "Ankara". It's dedicated to his memory and the victims of the Flight 982. May they rest in peace. The DC-10 involved in the accident was named in the production line as #29 and the aircraft was delivered to Turkey on 19th, December, 1972. It was one of the three to Turk Hava Yollari, the national airline to Turkey which in 1972 was one of the few European carriers to operate an aircraft known as a jumbo jet. Textures only for the payware Just Flight CLS DC10-10 HD model. By Kevin Alexander.
FS2004 / FSX / p3d All Nippon Airways ANA NAMC YS-11 1966. This is a repaint of the NAMC YS-11 in All Nippon Airways ANA 1966 colors. The Freeware NAMC YS-11 by Allied FS Group - AFG is needed for this repaint. ANA ordered the NAMC YS-11 in 1963. In July 1965, ANA became Japan’s (and the world’s) third operator of the Nihon YS-11, the first postwar commercial transport to be designed and manufactured in Japan. This repaint is in the original livery upon delivery. Textures are 32bit bmp. This repaint was tested on FSX-SE and should work on FSX , FS2004 , & p3d v1-3. By Ted Giana.
FSX / p3d Scenery--Seinajoki EFSI Finland. Seinajoki is a small privately owned airport located in the western part of Finland. It has a single, 2000-meters, ILS-equipped asphalt runway. Two stands on the main apron can accommodate a B738 or A320. Multiple parking spots for GA planes are also provided. For this scenery the surrounded landclasses were enhanced to include Kyrkosjarvi Lake, Kalajarvi reservoir, Friskinlammi river, and more accurate roads to make Seinajoki VFR-friendly. This scenery has seasonal photo background and accurate layout. Compatible with prepar3d v4 and FSX . Made by Dmitriy Kozyrev.